|Published (Last):||18 February 2016|
|PDF File Size:||5.70 Mb|
|ePub File Size:||6.15 Mb|
|Price:||Free* [*Free Regsitration Required]|
I wanted to use an aromatic wood, so I looked around at the local wood store. I begin by making a pattern.
Here they are leveled off to a rough length. Blahout for this usefull page. May 12 My wood came today from Atlantic Violin Supplies Pretty nice stuff, too.
Instrument Making Journal
I would like to build an acurate 3D violin model for acoustic simulations. The piece on the right makinng medium flamed European Maple with four pieces of matching sides, the piece in the middle is middle-grade European Spruce, and the small wedge is the European Maple neck block with light flaming.
I would like to try making a Bergonzi outline? Here I have cut it out roughly, as the violin making step by step pdf download distort the material: I start out by selecting the material for the neck, tail and corner blocks of the violin. Hello, all the images are done in Inkscape, so if you need exact sizes, open the svg files in this app. You can see here I drilled the holes, and have de-burred them. Track this topic Receive email notification when a reply has been made to this topic and you are not active on the board.
If you join stel community, you’ll be able to access member-only sections, and use many member-only features such as customizing your profile, violin making step by step pdf download personal messages, and voting in polls. Best of luck with your research, VB. I start by scribing the shape from the pattern onto the blocks: And here I have used a sander to get the outline closer.
I start out by marking the bookmatches of the ribs. These lines are for the blocks, and will be cut out: Even though the sanding drum oscillates, it didn’t move the rib piece up and down at all, and in fact left a very smooth, non-groovy surface because of vioin oscillating action.
Thank you for preparing this comprehensive guide to violin making. The construction of the mould is described in the “Mould” section of the website. Please if you can, add comments on pages where the instructions seem unclear. Then I quickly peal off the pattern and run it under hot water to clean it off: Then I cut out the rest of the mold, and trimmed everything up with sanders and files: Violin making step by step pdf download marking an outside face and edge, I joint one edge: Some things become obvious only when you actually try to build an instrument from start to finish and what may seem obvious to me, may not be so to others.
I checked on violin making step by step pdf download end blocks for the correct 30mm – 32mm taper, and checked along the corner blocks for side-to-side level.
I figured out that the dimensions are a bit off. This is a sanding board I made to level the blocks. Here is where the leveling screws come into play.
For me, I found stel this is already a really useful site – thank you so much for setting it up. You vy see the layout in these pics, the original layout has seven holes near the blocks for clamps to fit in. I violin making step by step pdf download probably going to alter the mold from the plans, but I still need to figure out exactly how Downloac want to do it. May be because of the svg into dxf conversion.
It was such a nice board I bought the whole ivolin There is a link at the frontpage, and it references the great Cournall book on violin making. Create your own social network with a free forum.
You can see the upper and lower ribs will be book matched, but not the c-bouts the piece on the leftthey will be from the same lenght: Is there a file with all drawings. I then cut off the excess of the opposite edge, and violin making step by step pdf download that edge: I took off a small amount at a time, taking four passes: I’m not sure how well this stuff will hold, as I lacquered the mold earlier, so I used alot of glue on each block And here they are cut out and ready for bending: Could you please help?
There is no msking to register to access all the information on this site. I made the pattern on thin Aluminium sheet. May 9 You can also see I removed alot of the excess on the corner blocks: Here Ma,ing have carefully cut it out closer, and punched with an awl all the holes I need to drill: I’ve only experimented a little with hide glue, not really used it much. Here are two pics of the patterns supplied, two copies of violin making step by step pdf download May 1 ,